Digital Photography

TASK 1

                                                         

SHUTTER SEED 

A camera's shutter determines when the camera sensor will be open or closed to incoming light from the camera lens. The shutter speed specifically refers to how long this light is permitted to enter the camera. "Shutter speed" and "exposure time" refer to the same concept, where a faster shutter speed means a shorter exposure time.

EXAMPLE PICTURE

Slow Shutter Speed

 MY WORK

Fast Shutter Speed

APERTURE

A camera's aperture setting controls the area over which light can pass through your camera lens. It is specified in terms of an f-stop value, which can at times be counterintuitive, because the area of the opening increases as the f-stop decreases. In photographer slang, when someone says they are "stopping down" or "opening up" their lens, they are referring to increasing and decreasing the f-stop value, respectively.

EXAMPLE PICTURE

Wide Aperture

Narrow Aperture

MY WORK

ISO

The ISO speed determines how sensitive the camera is to incoming light. Similar to shutter speed, it also correlates 1:1 with how much the exposure increases or decreases. However, unlike aperture and shutter speed, a lower ISO speed is almost always desirable, since higher ISO speeds dramatically increase image noise. As a result, ISO speed is usually only increased from its minimum value if the desired aperture and shutter speed aren't otherwise obtainable.

EXAMPLE PICTURE

MY WORK

TASK 2

 Magazine Cover

TASK 3

Depth of field is the amount of distance between the nearest and farthest objects that appear in acceptably sharp focus in a photograph. A preferred selection Depth of field ("DOF") in a focused subject in an image can be quite subjective. Remember this, adequate selection of DOF for one situation, application may be unacceptable for another photographer. It is all a matter of personal preference when trying to determine the appropriate use of DOF to enhance an effect in a photograph. 

Shallow

Gretest